If you go into your basement and see water puddling around your water heater, you may wonder why this is happening and what you should do. Water heaters contain water, so you should expect leaks from time to time. A leak can occur for many reasons, but it is something a plumber might be able to fix. Here are several things that can cause this problem along with the steps you should take if this happens.
What Causes Water Heaters To Leak?
A water heater can spring a leak in several different ways, and the first thing you should do is examine the hot water heater to see if you can tell where the water is leaking from. As you do this, you might find that the hot water heater itself is not even leaking. The leak might be coming from a pipe located near the tank. If this is the case, it is not the hot water heater that will need repairs. It may simply be that a pipe or fitting has corroded enough to spring a small leak.
You should also realize that it is normal to see a small amount of water by your system. This water is often condensation from the device, and it is completely normal with hot water heating systems.
Next, look at the valve on the hot water heater—it is a spigot and is located on the bottom of the device. This spigot is used to eliminate sediment from your system, but it should not be allowing a whole bunch of water to come out. If you see water coming from this spigot, a plumber will need to replace it to fix the problem.
The other part that can leak is the actual tank the system uses to hold hot water. These tanks are often made of steel, and they can corrode over time, especially if you have hard water. If you see water coming from the tank, you will most likely need to replace the tank in order to fix the problem. There is no good way to fix a hole in a hot water tank.
What Should You Do If You Find Hot Water by Your Hot Water Heater?
After noticing water near your hot water heater, you should go through the steps to see if you can find where the water is coming from. After doing that, you may know what the problem is and you can tell this to the plumber you call for services. Next, you will need to shut off the hot water heater so that it does not continue making hot water. In addition, you should shut off the water supply that is coming to this device so that it does not keep filling up. As you do this, use caution. The tank and the water in it can be very hot.
Finally, you should turn on a faucet in your home to the hot water setting and let it run. You will need to empty the tank of all the water in it, and turning on a faucet to hot will help you do this. The purpose of this is to have an empty hot water heater tank ready for the plumber when he arrives to your home. This will speed up the repairs, and you will have hot water faster then.
Hot water heaters can spring leaks, especially if they are old. If you encounter any type of problem with a leak or any other issue with your hot water heater, you will need to call a plumbing contractor for help fixing it. For more information, contact local professionals like StateWide Mechanical II Inc.