Talking About Plumbing Services

About Me

Talking About Plumbing Services

Hello, my name is Isaac Woldile. I am going to use this site to talk about plumber services of all kinds. Plumbers keep the unseen components in perfect condition to prevent catastrophic failures. When the plumbing fails, the results can be so bad that they drive you out of your home. When the sewer lines backed up in my home, the sheer amount of water and sewage flowing into my home was astonishing. I was displaced for months as workers attempted to clean it all up. From that point on, I proactively called in plumbers at the slightest hint of a problem. I will detail signs and symptoms that indicate the need of a plumber. I will also talk about techniques and tools plumbers used to make the repairs. Thanks for visiting.

Troubleshooting Three Basic Water Well Pump Problems

Having your own water well means you may need to troubleshoot the well's pump from time to time. With just a bit of basic knowledge, you can determine what might be wrong with the well pump and decide when it's time to call a plumber. Here are a few troubleshooting tips you may want to learn if you have a water well on your property.

Pump Runs Nonstop

You may find that your well pump runs continuously, which can be a sign that you need a new pressure switch. Before replacing the switch, attempt to adjust the switch. In some cases, just a small adjustment can cause the motor to turn off when the pump does not need to operate. Cleaning the contacts for the pump can also help to resolve the issue. If the pump is running nonstop and there is no water flow to your home, you may have a broken water line, which may require the help of an experienced plumber.

Pump Does Not Work At All

The first step to troubleshooting a pump that is not working at all is to check to make sure that the well switch has not been turned off accidentally. Once you've determine that the switch is powered on, look to see if the circuit breaker has been tripped. If your pump wasn't wired properly, or if the pump shares a circuit with other appliances, it may become overloaded. To troubleshoot a breaker issue, you'll need to check the switches in your home's breaker box. If the breaker is tripped repeatedly, you may need to have your plumber inspect the system and perform any repairs to prevent overloading the circuit in the future.

Low Water Pressure

There are many reasons that your home might be experiencing low water pressure, but one common problem is that the well pump loses its prime. You can prime your pump on your own, or you can have your plumber handle this task for you. The priming process involves powering off the pump, releasing any remaining water or air from the system, and then pouring water into the pump prime opening. If you choose to do this on your own, you'll want to read the instruction manual provided by the manufacturer. Your plumber can also walk you through the steps so you can prime the pump the next time you experience low water pressure.

If you are uncomfortable with DIY projects, or if you simply aren't sure what is wrong with the well pump, don't hesitate to call your licensed plumber for assistance. He or she can help with well water pump repair.